Skip to content
DFY Inbox Setup

Email Deliverability Test: Free Tools and a 10-Minute Audit

A free email deliverability test you can run in 10 minutes: which tools to use at each step, how to check if your email lands in spam, and what the results mean.

Photo of Farhan MujahidBy Farhan MujahidFounder and CEO, DFY Inbox Setup

Updated · 9 min read

Open rates and reply rates are slow, noisy signals. By the time they drop, your emails may have been landing in spam for weeks. A short deliverability test catches problems earlier and tells you which part of the setup to fix.

This guide shows how to run an email deliverability test for free: the testers and spam checkers worth using, and an audit you can finish in about 10 minutes. If your emails are already going to spam, read the 12 most common causes alongside it.

What a deliverability test checks

AreaQuestion it answersHow you test it
SetupAre MX, SPF, DKIM and DMARC published and passing?DNS lookup and email headers
ReputationDo providers trust your domain?Blocklists, Postmaster Tools, bounce and complaint rates
PlacementWhere does the email land right now?Seed test to real inboxes
ContentDoes the email itself look like spam?Spam score from Mail Tester

Free email deliverability test tools

  • Our email deliverability checker. Checks MX, SPF, DKIM, DMARC and domain age for a sending domain in one go, with a score and a fix for each problem. Pair it with our email spam checker for your copy and the header analyzer for test emails.
  • Google Admin Toolbox Check MX. Checks MX, SPF, DKIM and DMARC for a domain and explains each problem it finds. Best for Google Workspace domains.
  • MXToolbox. Looks up any DNS record and checks your domain against dozens of blocklists at once.
  • Mail Tester. Gives you a one-time address. Send your email to it and get a score out of 10 covering authentication, content, links and blocklists. The free version allows a few tests a day.
  • Google Postmaster Tools. Shows the spam rate Gmail users report for your domain, plus authentication results. Data appears once you send enough email to Gmail addresses each day.
  • Spamhaus checker. Tells you whether your domain is on the Spamhaus lists, which many mail servers rely on.
  • A few personal test inboxes. Free Gmail, Outlook.com and Yahoo accounts you control, used for seed tests.

The 10-minute deliverability audit

Run this from the inbox you actually send campaigns from, using the email you actually plan to send. Setting up a new domain? Run the cold email domain checklist first.

Minutes 0 to 2: check DNS

Enter your sending domain in Check MX or MXToolbox. You want one SPF record, a DKIM record for your provider, a DMARC record at _dmarc, and MX records pointing at Google or Microsoft. Anything flagged red goes to the top of your fix list. Our SPF, DKIM and DMARC guide has the correct records.

Minutes 2 to 4: get a spam score

Open Mail Tester, copy the address it shows, and send your campaign email to it from your sending inbox. Check the score and open each section that lost points. Use your real subject line, body and signature; a test email that says “test” tells you nothing about your campaign.

Minutes 4 to 6: run a seed test

Send the same email to your Gmail, Outlook.com and Yahoo test inboxes. Note where each copy lands: inbox, a tab such as Promotions, or spam. Do not open or move them before you record the result.

Minutes 6 to 7: read the headers

In Gmail, open the test email, click the three dots and choose Show original. Check that SPF, DKIM and DMARC all say PASS. In Outlook.com, open the message source and look for the Authentication-Results line.

Minutes 7 to 8: check blocklists

Look up your sending domain on the Spamhaus checker and run the MXToolbox blacklist check. With Google Workspace and Microsoft 365 you send through their servers, so focus on your domain rather than an IP address.

Minutes 8 to 10: review your sending numbers

Open your sending tool and Postmaster Tools and note four numbers for the last two weeks: emails per inbox per day, bounce rate, reply rate and spam rate. These show reputation trends that a single test cannot.

Reading your results

CheckHealthyAct now
DNS recordsAll found, one SPF recordMissing record or two SPF records
HeadersSPF, DKIM and DMARC all PASSAny FAIL or NONE
Mail Tester score9 to 10Below 8
Seed testInbox at all three providersSpam at any provider
BlocklistsNot listedListed on Spamhaus or several others
Emails per inbox a day25 to 30 after a 30-day warm-upWell above 30
Bounce rateUnder 2%Above 3%
Spam rate in Postmaster ToolsUnder 0.1%0.3% or higher
Google asks senders to keep reported spam under 0.3%. Under 0.1% leaves you a safety margin.

If setup checks fail, fix DNS first. If setup passes but placement is poor, look at volume, warm-up and list quality. Our email deliverability guide explains each of these in depth.

How to run an inbox placement test

An inbox placement test answers the question every other check only hints at: where does this email actually land? You can run a manual version for free in about 15 minutes.

  1. Set up a few test inboxes you control: at least one personal Gmail, one Google Workspace, one Outlook.com and one Microsoft 365 inbox, plus Yahoo if your prospects use it. Do not use warm-up accounts, because they already know your domain.
  2. Send your real campaign email from your real sending inbox, with the same subject, links and signature. Send it one at a time, not as a bulk send from a test list.
  3. Record where each copy lands: Primary inbox, a tab such as Promotions or Other, or spam. Check spam folders, not just the inbox.
  4. Open the headers of each copy and confirm SPF, DKIM and DMARC all show PASS. Our free email header analyzer reads them for you.
  5. Repeat from two or three of your other sending inboxes, so one inbox having a bad day does not mislead you.
ResultWhat it usually meansWhat to do
Inbox everywhereSetup and content are soundSend, and keep watching replies and bounces
Spam at one providerReputation or content problem at that providerCheck that provider’s tools, slow down, test again
Spam everywhereSetup, blocklist or content problemFix DNS and blocklists first, then rewrite the email
Promotions or Other tabEmail reads like marketingCut links, images and tracking, write it like a personal email

Paid inbox placement tools run the same test across dozens of seed inboxes and report percentages. They save time at scale, but they still measure seed inboxes, not your prospects, so treat their numbers as a guide rather than a promise.

How often to test

  • Before the first campaign on every new domain, ideally near the end of its 30-day warm-up.
  • Once a week for a sample of active domains. With many domains, rotate through them.
  • Straight away when reply rates drop suddenly, or after any change to DNS, volume, copy or sending tool.

What deliverability tests cannot tell you

Tests are a snapshot. A seed test uses a handful of inboxes, and Gmail filters each person’s mail partly on their own behavior, so your prospects may see a different result. Test inboxes that already know your domain, such as warm-up accounts, often look better than real prospects will. And a perfect Mail Tester score only proves your setup and content are sound; it says nothing about how recipients react.

Use tests to catch setup and content problems quickly, and use your real numbers (replies, bounces and spam rate) to judge reputation over time. If you are building from scratch, our guide to setting up cold email infrastructure covers the setup that makes these tests pass, and our cold email infrastructure setup does it for you.

Frequently asked questions

What is an email deliverability test?

A check of whether your emails reach the inbox. It looks at your DNS records, your domain reputation and blocklists, the content of the email, and where a real test email lands at Gmail, Outlook and Yahoo.

Is there a free email spam checker?

Yes. Mail Tester gives a free spam score out of 10 for any email you send to it, and you can check your domain against blocklists for free with MXToolbox and the Spamhaus checker.

How can I test my email deliverability for free?

Check your DNS with Google Admin Toolbox or MXToolbox, send a test to Mail Tester for a spam score, send your real email to a few Gmail, Outlook and Yahoo inboxes to see where it lands, read the headers for SPF, DKIM and DMARC results, and look up your domain on the Spamhaus checker.

What is a good Mail Tester score?

Aim for 9 or 10 out of 10. Anything lower comes with a list of what cost you points, such as a missing DKIM signature, a blocklist listing or broken links. Fix those first, then test again.

How often should I test deliverability?

Test every new domain before its first campaign, check active domains once a week, and run the full audit any time reply rates drop suddenly or you change DNS, sending volume or your sending tool.

What is an inbox placement test?

You send your email to a set of test inboxes across providers and record whether each copy lands in the inbox, a tab such as Promotions, or spam. Paid tools automate it, but a manual version with a few test accounts works for small teams.

Is a good test result a promise that my emails will land in the inbox?

No. Tests show that your setup is sound and your email is not obviously spammy. Real placement also depends on your sending history, volume, list quality and how recipients react, which no single test can measure.

Your next campaign could be sending by the end of the week.

Create a free account, build your order in a few minutes and request a quote. You only pay when you are happy with it.